ACU Lok Installation Guide

How to Install the ACU Lok- On Cam

First, take the orange key and position it with the arms, flat side up
Insert the key below the prongs of the ACU Lok Elite. The key should cover up the ACU Lok logo.
Press the key in firmly, then slide the key and lock up the prongs
Then look on your bottom bow cam and find two holes where each prong could fit through without pushing on the bowstrings. Each prong should be on either side of the limbs.
Inset the part of the ACU Lok with the prongs, rigid side down through the holes in the cam
Take the Lok, with the logo facing outward and the ring on the key above the prongs
Slide the prongs into the holes of the Lok and push the Lok down on the prongs. There should be a clicking noise, indicating that the Lok is working.
To unlock the ACU Lok, grab the key with the arms flat side up
Insert the key in the holes, under the prongs on the front of the lock
Press firmly and slide the lock and the key up the prongs.

First, take the orange key and position it with the arms, flat side up
Insert the key below the prongs of the ACU Lok Elite. The key should cover up the ACU Lok logo.
Press the key in firmly, then slide the key and lock up the prongs
Place one prong, rigid side down, on either side of the strings and cables
Take the Lok, with the logo facing outward and the ring on the key above the prongs
Slide the prongs into the holes of the Lok and push the Lok down on the prongs. There should be a clicking noise, indicating that the Lok is working.
To unlock the ACU Lok, grab the key with the arms flat side up
Insert the key in the holes, under the prongs on the front of the lock
Press firmly and slide the lock and the key up the prongs.

ACU Archery USA
79 LaDonna Dr.
Clay City, KY 40312
Phone (606) 947-8111
[email protected]